Description
STIHL OEM 3005 008 3903 Light 01 Guide Bar – 10"
Keep your STIHL chainsaw or pole pruner cutting smoothly with the genuine STIHL Light 01 10-inch Guide Bar (3005 008 3903). Designed for durability, precision, and maneuverability, this lightweight guide bar features STIHL's legendary quality with an updated modern design.
Ideal for battery-powered equipment, the Light 01 Guide Bar is also approved for occasional use with compatible gasoline-powered chainsaws, arborist saws, and pole pruners. Its narrow bar nose and single-rivet sprocket provide excellent maneuverability, while induction-hardened rails help reduce wear and extend service life.
Product Specifications
- OEM Part Number: 3005 008 3903
- Brand: STIHL
- Part Name: Light 01 Guide Bar
- Bar Length: 10 Inches
- Chain Pitch: 3/8" Picco (Low Profile)
- Gauge: .043" (1.1 mm)
- Bar Type: Lightweight Sprocket Nose
- Construction: Single-Rivet Nose Sprocket with Induction-Hardened Rails
- Genuine STIHL OEM: Factory-quality replacement guide bar
Fits These STIHL Models
HT 134, HT 135, HT-KM, HTA 135, HTA 140.0, HTA 150.0, HTA 160.0, HTA 160.1
Important: Verify your equipment model, original bar mount, chain pitch, gauge, and drive link count before ordering. Some models may have different factory bar and chain configurations.
Features & Benefits
- Lightweight Design: Excellent for battery-powered saws and pole pruners.
- Narrow Bar Nose: Improves maneuverability and cutting control.
- Single-Rivet Sprocket: Provides a compact nose design for precision cutting.
- Induction-Hardened Rails: Improve wear resistance and durability.
- Laser-Engraved Specifications: Conveniently displays bar length, pitch, gauge, drive link count, and part number.
- Genuine STIHL Quality: Designed for reliable performance and proper fit on approved equipment.
Related Parts (Frequently Replaced Together)
- 10" STIHL 3/8" Picco .043" Saw Chain: Select the correct drive link count for this guide bar.
- STIHL Chain Sprocket: Inspect for worn or damaged teeth when replacing the bar.
- STIHL Chain Tensioner Components: Inspect the adjustment screw and tensioning mechanism.
- STIHL Bar and Chain Oil: Essential for proper lubrication and reduced wear.
- STIHL Bar Maintenance Tool: Helps clean the guide bar groove and oil passages.
Installation Tips
- Turn off the equipment and remove the battery or disconnect the spark plug wire before servicing.
- Release chain tension and remove the sprocket cover, old chain, and guide bar.
- Clean the bar mounting surface, oil outlet, and surrounding sawdust buildup.
- Inspect the drive sprocket and chain tensioner for wear or damage.
- Install the new guide bar with a compatible 3/8" Picco .043" gauge chain of the correct drive link count.
- Make sure the chain drive links are properly seated in the guide bar groove and drive sprocket.
- Adjust chain tension according to the equipment operator's manual. The chain should move freely without excessive slack.
- Check that the chain lubrication system is functioning properly before cutting.
- Recheck chain tension after initial operation, especially when installing a new chain.
Not Sure If This Is the Right Bar?
Contact us with your STIHL model and serial number, and we'll help verify the correct guide bar and chain combination before you order.