Description
Plow Blade Construction
The MVP 3™ flared v-plow blades soar from a 35″ center height up to a full 45″ at the outer edge on heavy-duty 10′ 6″ models.
The MVP 3 v-plow is available in 14-gauge powder coated, stainless steel, and 1/4″ high-density polyethylene in 8′ 6″ and 9′ 6″ widths. 10′ 6″ models are available in 11-gauge powder-coated steel and 12-gauge stainless steel options.
All MVP 3 models feature a clean-scraping 70-degree attack angle, and come with a standard 6″ high-carbon steel cutting edge to reduce wear and extend the life of the blade.
Structural Reinforcement
Eight vertical ribs on 8′ 6″, 9′ 6″ and 10′ 6″ models, combined with the exclusive WESTERN® POWER BAR, provide exceptional torsional strength and rigidity to eliminate blade twisting. The high-strength steel base channel provides extra support along the bottom of the plow blade.
A 1¼”-diameter, heat-treated steel center pin resides within a three-connection-point hinge, keeping the wings tight for optimal performance.
Double-Acting Cylinders
As a standard feature on the MVP 3™, UltraLock double-acting cylinders allow the operator to use the v-plow in straight blade mode by locking the wings together instead of having to toggle each wing independently.
The double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.
TRIP PROTECTION
Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles.
Whether in V, scoop, or straight blade configuration, the trip edge helps protect the plow, the truck, and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.
Steel Center Gap Cover
For the cleanest pass in any blade configuration, the MVP 3™ v-plow has a snow control gap cover over the center hinge to help deflect and prevent snow from being lost over the top of the blade.
PRICING REFLECTS COMPLETE UNIT. PRICE DOES NOT INCLUDE INSTALL. FINANCING IS AVAILABLE!
| Moldboard Options | Steel |
| Blade Type | V-Plow |
| Vehicle Compatibility | Truck Class 2 - 6 (under 26,000 lb GVWR) & Tractors |
| Approx. Weight* (Without Mount) |
Steel: 1,070 lbs. |
| Plowing Width (Full Angle) |
Full Angle: 8'6" Scoop: 8'2" Full V: 8'7" |
| Blade Width | 9'6" |
| Blade Height | At Center: 31" At End: 39" |