Description
Eliminate the Guessing Game and Replace your Problematic Safety Switch, knowing that the Hustler OEM 602538 Bolt on Plunger Style Safety Switch contains the right Wiring Polarity For your Hustler Machine. The Hustler 602538 Plunger NC/NO Safety Switch is not limited to but often is used as a Safety Switch on the Super S and Super SF Models as Brake Safety Switch, On the Surfer PRO, Super S and Super SF as an Operator Stand-on Platform Safety Switch to sense Weight load and play a similar Safety Switch Role as the Seat Switch on the Sit-On Mowers; Used as well on the Brake/Neutral Position Safety Switch on select Raptor Flip-Up Models on the Operator Handle Linkage/Assembly; and On the Super 88 and Super 104 Models to sense when the tow side wings are up and down. Refer to Images Above and the Special Notes Below to verify a Correct Fit. Click on the Additional Part References Below to be Redirected.
NOTE: Some Raptor Flip-up Models may Have a difference in Brake Safety Switch a Visual Inspection of the Wire Harness Connecter that connects to the Safety Switch will tell you as to which one is the correct Safety Switch for your unit. Hustler OEM 602538 will not have exposed Spade on The Safety Switch When removing the Wiring Connector from the Safety Switch. If you Have the Expose Spade Style of Safety Switch, click on part Number 781211 to be Redirected.
COMMON HUSTLER OEM 602538 SAFETY SWITCH FASTENER REFERENCE
- 060731 - Hex Head Screw (Size 10-24 x .500 Shorter) - x 2
- 063198 - Hex Head Screw (Size 10-24 x .750 Longer) - x 2
- 601822 - Nut Plate - x 2
Specification
|
Product Number: |
602538 |
|
Brand: |
Hustler |
|
Length: |
2.95 IN |
|
Width: |
1.20 IN |
|
Height: |
0.90 IN |
|
Weight: |
0.045 LB |
Model Fit: