Description
The Hustler 601013 OEM Counterclockwise Standard Low Lift blades have a subtle curved Discharge Ear at the end minimizing air flow. This reduced suction allows for a cleaner mowing experience, with less dust and debris for a lower liability. Compared to Hi-Flow blades, Hustler Low Flow blades cause less strain on the engine. For dryer sandier conditions and lighter grass types, the Hustler OEM 601013 LO-FLOW Mower Blade is the preferred choice. Hustler 601013 Counter-clockwise Mower Deck Blade was also Designed with reverse sails to act in a counterclockwise rotation allowing air flow that is transferred to the Right side of the deck (NORMAL DISCHARGE LOCATION) to be re-diverted back to the left. Also Allowing the flow of grass clipping to take the path of least resistance and be discharge at the rear of the deck. The Hustler OEM 601013 Counterclockwise Gator Mower Deck Blades are engineered and designed giving you the correct sail angle and air flow to still properly Discharge on the Super 88 Models. Limited Early 54" Super Z Deisel and X-ONE Rear Discharge Models may require Hustler 601013. * Refer to the Notes Bellow for further verification.
To ensure accuracy, please consult the above images, Special Notes Section and Mower Blade Fit Chart (Per Mower series), as well as the Model Fit Chart below for any variations in overlapping part numbers between models. Additionally, check the links below for further references.
NOTE: There is an Early Super Z Deisel 54" Rear Discharge Model and X-ONE 54" Rear Discharge Model that had a few Serial Number where they used Part Number 601013 as a reverse LO-FLO blade. To easily determine whether your X-ONE Rear Discharge requires a reverse Low Lift Mower Blade a visual verification is required. Mower Decks that require 601013 had no individual baffling between the individual Mower Deck Blades. Current X-ONE Models that have the Individual Baffling between the individual Mower Deck Blades do Require all three Mower Blades of the same likeness. Super Z Deisel Models where few in Production with the 54". Any Super Z 54" Deisel Rear Discharge Model will require a reverse flow Mower Deck Blade. 601013 will always be mounted on the left side of the Mower Deck as you sit on the operator seat. These Productions where very Limited so there is no other note elsewhere reference to these Models.
BLADE PART NUMBER - MOWER BLADE FIT CHART and REFERENCE
- SUPER 88 (Rear Discharge) * refer to notes and placement guide below
- 601124 - Standard Low Lift Mower Blade (Clockwise) - PLACEMENT * - Marked in Images with Yellow Dot.
- 601012 - Fusion Low Lift Mower Blade (Clockwise) - PLACEMENT * - Marked in Images with Yellow Dot.
- 601013 - Standard Low Lift Mower Blade (Counter-Clockwise) - PLACEMENT ** - Marked in Images with Red Dot.
- 797704 - Standard Mulching Mower Blade (Clockwise) - PLACEMENT * - Marked in Images with Yellow Dot.
- 607618 - Standard Mulching Blade (Counter-Clockwise) - PLACEMENT ** - Marked in Images with Red Dot.
NOTE: SUPER 88 Rear Discharge Models do require a Clockwise and Counter-Clockwise Mower Deck Blade. Above in the Images are some Examples with the Clokwise and Counter-clockwise Mower Blades being marked with Different Color Dots to show their correct placement. Refer to the Placement Guide Below and Images Above for the correct usage and placement on 88" Rear Discharge Models.
SUPER 88 MOWER BLADE PLACEMENT GUIDE
(LEFT-RIGHT AS YOU SIT ON THE OPERATORS SEAT)
- PLACEMENT * - RIGHT SIDE and CENTER Mower Blade on the Center Mower Deck - Marked with Yellow Dot in Images. Takes 3 Per Unit.
- PLACEMENT ** - LEFT SIDE Mower Blade on the Center Mower Deck - Marked with Red Dot in the Images. Takes 2 Per Unit.
Specification
Product Number: |
601013 |
Brand: |
Hustler |
Length: |
18.35 IN |
Width: |
4.30 IN |
Height: |
0.80 IN |
Weight: |
2.425 LB |
Model Fit: