Toro OEM 138-3615-01 Chute Deflector 

 

Restore proper snow-throwing control with this genuine Toro chute deflector assembly. The deflector mounts to the top of the discharge chute and adjusts the discharge height/trajectory helping you keep snow where you want it.

 

• OEM Part Number: 138-3615-01, 138 3615 01, 138361501
• Part Name: Deflector (Deflector Weld Assembly)
• Function: Controls discharge throw height at the chute outlet
• Genuine Toro OEM: Correct fit and performance on compatible Power Max Toro snow throwers

 

Supersession / Cross-Reference

 

• Replaces / Supersedes: 136-3615-03, 136 3615 03, 136361503

 

Fits These Toro Models (By Family)

Verify your model number (and serial range when applicable) from the machine tag before ordering.

 

POWER MAX & POWER MAX HD Series – Model Numbers – (* Model Numbers 37798, 37799, 37802, 37805, 37807, 38812, 38814, 38819, 38838)

 

E - POWER MAX Series – Model Numbers – (* Model Numbers 31875, 39924, 39925, 39926, 39926T)

 

Associated Parts (Common “Replace With” Items)

 

A) Deflector Mounting / Seal Parts

 

• 138-3671 – Gasket, Deflector (prevents leakage and helps proper fit) Qty 1
• 138-3612-01 – Bracket, Spring (Mounts Using the Discharge Chute Deflector Center Mounting Hole) Qty 1
• 135-1929 – Bolt, Carriage (Retains Upper and Lower Discharge Chute Deflectors to Each other as well as the Lower Discharge Chute Deflector to the Main Discharge Stack using the Hinged Carriage Bolt Holes - all Carriage Bolts should be Assemble Inside -Out of the Chute Component Parts) - Qty 3
• 138-0719 – Nut, Hex Flange (Retains Upper and Lower Discharge Chute Deflectors to Each other as well as the Lower Discharge Chute Deflector to the Main Discharge Stack using the Hinged Carriage Bolt Holes - all Carriage Bolts should be Assemble Inside - Out, nut on the outside of Chute Component Parts) - Qty 3
• 138-8493 – Spring, Chute (Upper tension/return, Model Dependent) Qty 1

 

B) Chute / Deflector Control Cable Area Hardware

 

• 138-3678 – Spacer (Inserts into Control Cable Eyelet) Qty 1
• 137-3094 – Nut, Hex (Retains Control Cable and Spacer to the Discharge Chute Deflector) Qty 1
• 138-0689 – Phillips Screw (Retains Control Cable and Spacer to the Discharge Chute Deflector) Qty 1
• 138-3672 – Cable, Control (deflector) * Excluding Model 38838 Qty 1
• 144-1227 – Cable, Control (deflector) * Only Model 38838 Qty 1
• 136-7191 – Clamp, Cable (Retains Control Cable to the Discharge Chute Cable Weldment Bracket) Qty 1
• 137-3043 – Hex Washer Head (Retains Control Cable and Cable Clamp to the Discharge Chute Deflector Weldment) Qty 1
• 144-1246-01 – Main Discharge Chute or Stack (Replace if Damaged or Broken) * Select Models Only Review Model Fit Chart Associated to each Part Number
• 136-3611-01 – Main Discharge Chute or Stack (Replace if Damaged or Broken) * Select Models Only Review Model Fit Chart Associated to each Part Number

 

Installation Tips (Chute Deflector Replacement)

 

• Work on a clean, level surface with the machine off. Disconnect the spark plug wire (gas units) or remove the key and battery (electric units).
• Set the deflector to a mid-position before disassembly to reduce spring tension.
• Remove the deflector mounting hardware (carriage bolts and flange nuts). Note spring/bracket orientation before taking it apart.
• Replace the 138-3671 gasket if torn, missing, or stuck to the chute—this prevents snow leakage and helps proper alignment.
• Install the new 138-3615-01 deflector and tighten hardware evenly. Do not overtighten—binding usually means misalignment or pinched gasket.
• Cycle the deflector through its full range and confirm it moves smoothly and holds position.
• If the deflector won’t move from the handle, inspect cable routing and retention (cable clamp/anchor) and replace worn parts as needed.

 

Notes for Replacements

 

• Hardware may vary by model and serial number. Match fasteners to the unit’s illustrated parts list when possible.
• Deflector “won’t stay put” complaints are often caused by worn latch/pawl/trigger parts or improper spring orientation.

 

Need Help Verifying Fit?

 

Send us your Toro model number and serial number and we’ll confirm the correct part before you order.