Description
The Toro 105 7795 03 OEM Low Lift blades have a subtle curve at the end to minimize air flow. This reduced suction allows for a cleaner mowing experience, with less dust and debris for a lower liability. Compared to Hi-Flow blades, Toro's Low Flow blades cause less strain on the engine. For dryer sandier conditions and lighter grass types, the Toro OEM 105 7795 03 LO-FLOW Mower Blade is the preferred choice. This Mower Deck Blade was made to OEM Specifications to fit Toro - Older 36" and 52" Proline-Walk behind Models (EXCEPTION OF CURRENT MODELS - 44409, 44410, 44436), and Grandstand Models (WITH EXCEPTION OF HDM MODEL 74535) as well as the 52" ZMaster 3000, 5000, 6000, and 7000 series. Due to the part number overlap within series and multiple changes within Series that can have some differences in mower deck blade applications, Use the search tab above to search the Model Fit Chart Below To ensure your Model Number is Listed with the Blade Part Number. Please Refer to the Special Notes, References and The Model Fit Chart below to ensure a proper fit. Part Number 105-7795 Supersedes to 105-7795-03.
NOTE 1: Due to a Serial Number brake that could overlap Models, The Toro 105-7795-03 does require the External Octogen or Round Shaft/Blade Arbor Assembly with the Stand-Alone bolt and removable Belleville Washer. Refer to the image above for an accurate Comparision. If you have a Hex Insert Shaft/Blade Arbor on a 52" Toro Z Master or Grandstand refer to part number 140-4857.
NOTE 2: Due to a design change if you have a 36" Toro Grandstand HDM series Grandstand it will have a Hex Insert Shaft/Blade Arbor and require a different Mower Deck Blade, refer to Standard HI- Flo Mower Deck Blade 146-3411.
NOTE 3: Due to a Mower Deck design change (Newer Mid-Size Mower Decks) on the Proline and Walk-Behind Models any current 36" Proline Models specifically Current Models - 44409, 44410 and 44436 will require a DIFFERENT Mower Deck Blade, however there is no LOW-FLO Blade Reference, refer to HI-FLO Mower Deck Blade 138-8887-03.
- COMPATIBLE BLADE REFERENCES
- 105-7794-03 - Medium Lift Blade
- 105-7781-03 - Hi Flo Blade
- 105-7796-03 - Atomic Blade
- 105-7779-03 - Mulching/Recycler Blade
- 138-8887-03 - High Lift Blade (Recommended Specifically for Newer Mid-Size 36" ProLine Current Models - 44409, 44410, and 44436).
Specification
|
Product Number: |
105779503, 1057795 |
|
Brand: |
Toro |
|
Length: |
17.500 IN (44.450 CM) |
|
Width: |
2.300 IN (5.842 CM) |
|
Height: |
0.700 IN (1.778 CM) |
|
Weight: |
2.944 LB (1.335 KG) |
Model Fit:
74244, 74245, 74246, 74250, 74251, 74255, 74268, 30031, 30032, 30070, 30071, 30074, 30079, 30094, 30099, 30284, 30289, 30484, 30489, 30494, 30499, 30634, 30674, 30684, 30694, 30934, 30984, 30989, 38494, 38684, 38694, 39074, 39094, 39494, 39634, 39674, 39684, 39694, 39934, 39984, 74237, 74239, 74242, 74243, 74248, 74261, 74264, 74266, 74271, 74282, 74291, 74295, 74410, 74414, 74415, 74416, 74417, 74442, 74445, 74449, 74505, 74519, 74527, 74529, 74534, 74539, 74549, 74559, 74569, 74575, 74589, 74903, 74906, 74923, 74949, 74953, 74955, 74994, 74995, 75932, 75934, 75955, 78924, 78953, 79505, 79534, 79549, 79559, 79575, 79589